TLK111 TLK111 Industrial Temperature 10/100Mbs Ethernet Physical Layer...
The TLK111 is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair...
View ArticleTLK106L TLK105L, TLK106L Industrial Temp, Single Port 10/100Mbs Ethernet...
The TLK10xL is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling, integrating all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables....
View ArticleTLK105L TLK105L, TLK106L Industrial Temp, Single Port 10/100Mbs Ethernet...
The TLK10xL is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling, integrating all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables....
View ArticleTPD1S414 USB Charger OVP Switch with ESD for VBUS_CON Pin
The TPD1S414 is a single-chip solution for USB connector’s VBUS line protection. The bi-directional nFET switch ensures safe current flow in both charging and host mode while protecting the internal...
View ArticleDS90UA102-Q1 Multi-Channel Digital Audio Deserializer
The DS90UA102-Q1 Deserializer, in conjunction with the DS90UA101-Q1 Serializer, provides a solution for distribution of digital audio in multi-channel audio systems. It receives a high-speed...
View ArticleDS90UA101-Q1 Multi-Channel Digital Audio Serializer
The DS90UA101-Q1 Serializer, in conjunction with the DS90UA102-Q1 Deserializer, provides a solution for distribution of digital audio in multi-channel audio systems. It transmits a high-speed...
View ArticleSN65DSI86 MIPI® DSI BRIDGE TO eDP
The SN65DSI86/96 DSI to embedded DisplayPort (eDP) bridge features a dual-channel MIPI® D-PHY receiver front-end configuration with 4 lanes per channel operating at 1.5Gbps per lane; a maximum input...
View ArticleHD3SS213 5.4Gbps DisplayPort 1.2a 2:1/1:2 Differential Switch
The HD3SS213 is a high-speed passive switch capable of switching two full DisplayPort 4 lane ports from one of two sources to one target location in an application. It will also switch one source to...
View ArticleSN65LVDS822 SN65LVDS822 FLATLINK™ LVDS RECEIVER
The SN65LVDS822 is an advanced FlatLink™ LVDS receiver designed on a modern CMOS process. It has several unique features, including three selectable CMOS output slew rates, CMOS output voltage support...
View ArticleTLK10081 10Gbps 1-8 Channel Multi-Rate Redudant Link Aggregator
The TLK10081 is a multi-rate link aggregator intended for use in high-speed bi-directional point-to-point data transmission systems. The device allows for a reduction in the number of physical links...
View ArticleTLK10022 10Gbps Dual-Channel Multi-Rate Universal Link Aggregator
The TLK10022 is a dual-channel multi-rate link aggregator intended for use in high-speed bi-directional point-to-point data transmission systems. The device allows for a reduction in the number of...
View ArticleSN65HVD01 3.3V RS-485 with Low Voltage (1.65-V) I/O Supply & Selectable Data...
The SN65HVD01 is a low-power, 250 kbps or 20 Mbps data rate selectable RS-485 transceiver, utilizing a 1.65-V to 3.6-V supply for data and enable signals, and a 3.3 V ± 10% supply for bus signals. The...
View ArticleHD3SS6126 USB 3.0 Differential Switch 2:1/1:2 MUX/DEMUX
The HD3SS6126 is a high speed passive switch that is designed for USB 3.0 applications to route signals from a source to two destination or vice-versa. It can also be used for DisplayPort, PCIe, SATA,...
View ArticleONET8551T 11.3Gbps Limiting Transimpedance Amplifier with RSSI
The ONET8551T device is a high-speed, high-gain, limiting transimpedance amplifier used in optical receivers with data rates up to 11.3 Gbps. It features low-input referred noise, 9-GHz bandwidth,...
View ArticleDS125BR800A Low-Power 12.5-Gbps 8-Channel Repeater With Input CTLE and Output...
The DS125BR800A is an extremely low-power high-performance multi-protocol repeater/redriver designed to support eight channels of PCIe, SAS, and other high-speed interface serial protocols up to 12.5...
View ArticleONET1151L 11.3Gbps Low Power Laser Diode Driver
The ONET1151L device is a 3.3-V laser driver designed to directly modulate a laser at data rates from 1 to 11.3 Gbps. The device provides a 2-wire serial interface, which allows digital control of the...
View ArticleLSF0101 Single/Dual Bi-Directional Multi-Voltage Level Translator
The LSF0101 and LSF0102 are bidirectional voltage level translators operational from 1.0 V to 4.5 V (Vref_A) and 1.8 V to 5.5 V (Vref_B), which allow bidirectional voltage translations between 1.0 V...
View ArticleSN65LVPE512 Dual Channel USB 3.0 Redriver, Equalizer
The SN65LVPE512 is a dual channel, single lane USB 3.0 redriver and signal conditioner supporting data rates of 5 Gbps. The device complies with USB 3.0 spec revision 1.0, supporting electrical idle...
View ArticleSN888C Bus-Polarity Correcting RS-485 Transceiver with IEC-ESD Protection
The SN888C is a low-power RS-485 transceiver with bus-polarity correction and transient protection. Upon hot plug-in the device detects and corrects the bus polarity within the first 76 ms of bus...
View ArticleTPD12S520 HDMI Receiver Port Protection and Interface Device
The TPD12S520 is a single-chip electrostatic discharge (ESD) solution for the high-definition multimedia interface (HDMI) receiver port. In many cases, the core ICs, such as the scalar chipset, may...
View Article