Quantcast
Channel: TI - New Interface Products
Browsing all 588 articles
Browse latest View live
↧

TRS3253E-EP RS-232 Transceiver With Split Supply Pin for Logic Side

The TRS3253E is a three-driver and five-receiver RS-232 interface device, with split supply pins for mixed-signal operations. All RS-232 inputs and outputs are protected to ±8 kV using the IEC...

View Article


TPL7407L 40V, 7-channel, Low side driver

The TPL7407L is a high-voltage, high-current NMOS transistor array. This device consists of seven NMOS transistors that feature high-voltage outputs with common-cathode clamp diodes for switching...

View Article


LSF0102 Dual Bidirectional Multi-Voltage Level Translator

The LSF family are bidirectional voltage level translators operational from 1.0 V to 4.5 V (Vref_A) and 1.8 V to 5.5 V (Vref_B). This allows bidirectional voltage translations between 1.0 V and 5.0 V...

View Article

TXS0104E-Q1 Automotive Catalog 4-Bit Bidirectional Voltage-Level Translator...

The TXS0104E-Q1 device connects an incompatible logic communication from chip-to-chip due to voltage mismatch. This auto-direction translator can be conveniently used to bridge the gap without the...

View Article

TUSB9261-Q1 Automotive 2nd Generation SuperSpeed USB 3.0 to Serial ATA Bridge

The TUSB9261-Q1 is an ARM cortex M3 microcontroller based Universal Serial Bus (USB) 3.0 to Serial ATA (SATA) bridge. It provides the necessary hardware and firmware to implement a USB Attached SCSI...

View Article


TUSB551 USB 3.0 Single Channel Re-driver with Equalization

The TUSB551 is a 4th-generation USB3.0 SuperSpeed (SS) re-driver that features a 1.8V power supply with low consumption, superior output drive performance, and automatic LFPS De-Emphasis control for...

View Article

TUSB8020B-Q1 Two-Port USB 3.0 Hub, TUSB8020B-Q1

The TUSB8020B-Q1 is a two-port USB 3.0 compliant hub. It provides simultaneous SuperSpeed USB and high-speed/full-speed connections on the upstream port and provides SuperSpeed USB, high-speed,...

View Article

DS125DF111 Low Power Multi-Rate Two Channel Retimer

The DS125DF111 is a dual channel (1-lane bidirectional) retimer with integrated signal conditioning. The DS125DF111 includes an input Continuous-Time Linear Equalizer (CTLE), clock and data recovery...

View Article


DS125BR401A Low-Power 12 Gbps 4-Lane Repeater With Equalization

The DS125BR401A is an extremely low-power high-performance repeater/redriver designed to support four lanes carrying high speed interface up to 12 Gbps. The B-Side receiverÂ’s continuous time linear...

View Article


TCA9545A 4-Channel I2C and SMBus Switch With Interrupt Logic and Reset Functions

The TCA9545A is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCn/SDn channel or...

View Article

TCA9543A 2-Channel I2C Bus Switch With Interrupt Logic and Reset

The TCA9543A is a dual bidirectional translating switch controlled by the I2C bus. The SCL/SDA upstream pair fans out to two downstream pairs, or channels. Either individual SCn/SDn channel or both...

View Article

TPD4E110 4 CHANNEL PROTECTION SOLUTION FOR SUPER-SPEED (UP TO 6 GBPS) INTERFACE

The TPD4E110 is a uni-directional Electrostatic Discharge (ESD) protection device with ultra-low capacitance. The device is constructed with a central ESD clamp and features two hiding diodes per...

View Article

SN65HVD267 'Turbo' CAN Transceiver for CAN FD (Flexible Data Rate) with...

This CAN transceiver meets the ISO1189-2 High Speed CAN (Controller Area Network) Physical Layer standard. It is designed for data rates in excess of 2 megabit per second (Mbps) for CAN with flexible...

View Article


SN65HVD266 'Turbo' CAN Transceiver for CAN FD (Flexible Data Rate) with I/O...

This CAN transceiver meets the ISO1189-2 High Speed CAN (Controller Area Network) Physical Layer standard. It is designed for data rates in excess of 2 megabit per second (Mbps) for CAN with flexible...

View Article

SN65HVD265 'Turbo' CAN Transceiver for CAN FD (Flexible Data Rate)

This CAN transceiver meets the ISO1189-2 High Speed CAN (Controller Area Network) Physical Layer standard. It is designed for data rates in excess of 2 megabit per second (Mbps) for CAN with flexible...

View Article


DS125DF1610 9.8 to 12.5 Gbps 16-Channel Retimer

The DS125DF1610 is a sixteen-channel multi-rate retimer with integrated signal conditioning features. The device includes a fully adaptive Continuous Time Linear Equalizer (CTLE), Decision Feedback...

View Article

TCA9546A 4-Channel I2C and SMBus Switch With Reset Function

The TCA9546A is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCn/SDn channel or...

View Article


TPL7407L 40V, 7-Channel Darlington Array, Low Side Driver

The TPL7407L is a high-voltage, high-current NMOS transistor array. This device consists of seven NMOS transistors that feature high-voltage outputs with common-cathode clamp diodes for switching...

View Article

TPD1S514 USB Charger with Over Voltage, Surge and ESD Protection for VBUS_CON...

The TPD1S514x is a single-chip protection solution for the USB VBUS line or other power buses. The bidirectional nFET switch ensures safe current flow in both charging and host mode while protecting...

View Article

LSF0108 Octal Bidirectional Multi-Voltage Level Translator

The LSF family are bidirectional voltage level translators operational from 1.0 V to 4.5 V (Vref_A) and 1.8 V to 5.5 V (Vref_B). This allows bidirectional voltage translations between 1.0 V and 5.0 V...

View Article
Browsing all 588 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>