Quantcast
Channel: TI - New Interface Products
Browsing all 588 articles
Browse latest View live
↧

HVDA553-Q1 Automotive 5-V CAN Transceiver with I/O Level Adapting and...

The device is designed and qualified for use in automotive applications and meets or exceeds the specifications of the ISO 11898 High Speed CAN (Controller Area Network) Physical Layer standard...

View Article


HVDA551-Q1 Automotive 5-V CAN Transceiver with I/O Level Adapting and...

The device is designed and qualified for use in automotive applications and meets or exceeds the specifications of the ISO 11898 High Speed CAN (Controller Area Network) Physical Layer standard...

View Article


LMH0376 3 Gbps HD/SD SDI Low Power Reclocker with Eye Monitor and 4:1 Input Mux

The LMH0376 3 Gbps HD/SD SDI Low Power Reclocker with Integrated Eye Monitor and 4:1 Input Mux retimes serial digital video data conforming to the SMPTE ST 424, SMPTE ST 292, and SMPTE ST 259-C...

View Article

TSU6721 USB Port Multimedia Switch Supports USB, UART, AUDIO, ID, MIC, and...

TSU6721 is a high performance USB port multimedia switch featuring automatic switching and accessory detection. The device connects a common USB port to pass audio, USB data, charging, On The Go (OTG)...

View Article

SN65HVD888 Bus-Polarity Correcting RS-485 Transceiver with IEC-ESD Protection

The SN65HVD888 is a low-power RS-485 transceiver with automatic bus-polarity correction and transient protection. Upon hot plug-in, the device detects and corrects the bus polarity within the first 76...

View Article


ISO7420FCC Low-Power 2/0 Dual Channel Digital Isolator with Fail-Safe Output...

ISO7420FCC provides galvanic isolation up to 2500 VRMS for 1 minute per UL and 4242 VPK per VDE. This device has two isolated channels. Each channel has a logic input and output buffer separated by a...

View Article

ISO7141FCC 4242-VPK Small-Footprint and Low-Power 3/1 Quad Channel Digital...

ISO7131, ISO7140, and ISO7141 provide galvanic isolation up to 2500 VRMS for 1 minute per UL and 4242 VPK per VDE. ISO7131 has three channels with two forward and one reverse-direction channels....

View Article

TPD6E05U06 6-Channel Ultra low capacitance IEC ESD protection diodes

The TPDxE05U06 is a family of unidirectional ESD protection devices with ultra low capacitance. This family of devices is constructed with a central ESD clamp with two hiding diodes to reduce the...

View Article


TUSB501 USB 3.0 Single Channel Redriver with Equalization

The TUSB501 is a 3rd generation 3.3-V USB 3.0 single-channel redriver. When 5 Gbps SuperSpeed USB signals travel across a PCB or cable, signal integrity degrades due to loss and inter-symbol...

View Article


TCA9617A Level-Translating FM+ I2C Bus Repeater

This dual bidirectional I2C buffer is operational at 2.2 V to 5.5 V. The TCA9617A is a BiCMOS integrated circuit intended for I2C bus and SMBus systems. It can provide bidirectional voltage-level...

View Article

TPD2E1B06 2 channel system level ESD protection device for USB interfaces

The TPD2E1B06 is a dual channel ultra low cap ESD protection device. It offers ±10KV IEC contact ESD protection. Its 1pF line capacitance makes it suitable for a wide range of applications. Typical...

View Article

ISO7140FCC 4242-VPK Small-Footprint and Low-Power 4/0 Quad Channel Digital...

ISO7131, ISO7140, and ISO7141 provide galvanic isolation up to 2500 VRMS for 1 minute per UL and 4242 VPK per VDE. ISO7131 has three channels with two forward and one reverse-direction channels....

View Article

ISO7140CC 4242-VPK Small-Footprint and Low-Power 4/0 Quad Channel Digital...

ISO7131, ISO7140, and ISO7141 provide galvanic isolation up to 2500 VRMS for 1 minute per UL and 4242 VPK per VDE. ISO7131 has three channels with two forward and one reverse-direction channels....

View Article


TS3USB3031 DP3T USB 2.0 High-Speed and Mobile High-Definition Link (MHL)...

The TS3USB3031 is a double-pole, triple throw (DP3T) multiplexer that includes a high speed Mobile High-Definition Link (MHL) or Mobility Display Port (MyDP) switch and dual USB 2.0 High-Speed...

View Article

SN65HVD1792-EP Fault-Protected RS-485 Transceiver With Extended Common-Mode...

The SN65HVD1792 is designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. It is also robust to...

View Article


SN55LBC173-HIREL Quadruple Low-Power Differential Line Receiver

The SN55LBC173 is a monolithic quadruple differential line receiver with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device...

View Article

SN55LBC173 Quadruple Low-Power Differential Line Receiver

The SN55LBC173 is a monolithic quadruple differential line receiver with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device...

View Article


SN65472-EP SN65472-EP Dual Peripheral Driver

The SN65472 dual peripheral driver is functionally interchangeable with series SN75452B and series SN75462 peripheral drivers, but is designed for use in systems that require higher breakdown voltages...

View Article

ONET1151P 11.3Gbps Limiting Amplifier

The ONET1151P is a high-speed, 3.3-V limiting amplifier for multiple fiber optic and copper cable applications with data rates up to 11.3 Gbps. The device provides a two-wire serial interface which...

View Article

ISO7142CC 4242-Vpk Small Footprint and Low-Power 2/2 Quad Channel Digital...

ISO7142 provides galvanic isolation up to 2500 VRMS for 1 minute per UL and 4242 VPK per VDE. ISO7142 is a quad-channel isolator with two forward and two reverse-direction channels. This device is...

View Article
Browsing all 588 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>