The TCAN1463-Q1 is a high-speed Controller Area Network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification and the CiA 601-4 SIC specification. The device supports both classical CAN and CAN FD (flexible data rate) data rates up to 8 Megabits per second (Mbps).The...
↧
TCAN1463-Q1 Low-power signal improvement CAN FD transceiver with INH and WAKE
↧
ESD341 0.66-pF, ±3.6-V, ±30-kV ESD protection diode with 5.4-A surge rating in 0201 package
The ESD341 is a
bidirectional TVS ESD protection diode for HDMI 1.4 circuit protection. The ESD341 is rated to dissipate ESD strikes at the
maximum level specified in the IEC 61000-4-2 international standard (Level 4).This device features a 0.66 pF (typical) IO
capacitance enabling...
↧
↧
TCAL9539 16-bit low voltage, I²C-bus/SMBus I/O expander w/ interrupt, reset, and agile I/O configuration
The TCAL9539 device provides general purpose parallel input/output (I/O)
expansion for the two-line bidirectional I2C bus (or SMBus) protocol and
is designed for 1.08-V to 3.6-V VCC operation.The device supports 100-kHz
(Standard-mode), 400-kHz (Fast-mode), and 1-MHz (fast-mode-plus)...
↧
TMDS1204 12-Gbps HDMI 2.1 sink redriver
The TMDS1204 is an HDMI 2.1 redriver
supporting data rates up to 12 Gbps. It is backwards compatible for HDMI 1.4b and
HDMI 2.0b. The high-speed differential inputs and outputs can either be AC-coupled
or DC-coupled, which qualifies the TMDS1204 to be used as a DP++ to
...
↧
ESD752 Dual 3.2-pF, ±24-V, ±30-kV ESD protection diode with 6-A 8/20-µS surge in SOT-23 and SC-70 package
The ESD752 and
ESD7x2 are
bidirectional ESD protection diodes for USB power delivery (USB-PD) and industrial
interfaces. The ESD752 and
ESD7x2 are rated to dissipate contact
ESD that meets or exceeds the maximum level specified in the IEC 61000-4-2 level 4 standard
...
↧
↧