TCA39306-Q1 Automotive FM+ I²C bus and SMBus voltage translator
The TCA39306-Q1 is a dual bidirectional voltage-level translator compatible with I2C, SMBus, and I3C with an enable (EN) input, and is operational from 0.9-V to 3.3-V VREF1 and 1.8-V to 5.5-V VREF2.The...
View ArticleTUSB217A USB 2.0 high-speed signal conditioner with DCP and CDP controllers
The TUSB217A is a third-generation USB 2.0 high-speed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.The...
View ArticleTLIN2022A-Q1 Fault protected dual local interconnect Network (LIN)...
The TLIN2022A-Q1 is a Dual Local Interconnect Network (LIN) physical layer transceiver with integrated wake-up and protection features, compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and ISO/DIS...
View ArticleTLIN1022A-Q1 Automotive dual local interconnect network (LIN) transceiver...
The TLIN1022A-Q1 is a Dual Local Interconnect Network (LIN) physical layer transceiver with integrated wake-up and protection features, compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and ISO/DIS...
View ArticleTPS65994AE Dual port USB-C® PD controller, integrated source power switches...
The TPS65994AE is a stand-alone USB Type-C and Power Delivery (PD) controller providing cable plug and orientation detection for two USB Type-C connectors. Upon cable attachment, the TPS65994AE...
View ArticleTCAN1044A-Q1 Enhanced automotive CAN transceiver with standby
The TCAN1044A-Q1 and TCAN1044AV-Q1 are high speed controller area network (CAN) transceivers that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The...
View ArticleTCAN1057A-Q1 Enhanced automotive CAN transceiver with silent
The TCAN1057A-Q1 and TCAN1057AV-Q1 are high speed controller area network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The...
View ArticleTCAN1044AEV-Q1 Automotive grade-0 enhanced CAN FD transceiver with standby
The TCAN1044AEV-Q1 is a high-speed controller area network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The transceiver has a...
View ArticleTCAN1046AV-Q1 Enhanced automotive dual CAN transceiver with standby and 1.8-V...
The TCAN1046AV-Q1 and TCAN1048AV-Q1 ( TCAN104xAV-Q1) are dual, high-speed controller area network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high-speed CAN...
View ArticleTCA9536 Remote 4-Bit I²C and SMBus I/O expander with configuration registers
The TCA9536 is a 4-bit I/O expander for the I2C bus and is designed for 1.65-V to 5.5-V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I2C...
View ArticleTRSF3243E Multichannel RS-232 compatible line driver/receiver (3T/5R) with...
The TRSF3243E consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact...
View ArticleTCAN1167-Q1 Automotive CAN FD system basis chip with LDO output and watchdog
The TCAN1167-Q1 is a high-speed Controller Area Network (CAN) system basis chip (SBC) that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification. The transceiver...
View ArticleTCAN1164-Q1 Automotive CAN FD system basis chip with LDO output and watchdog
The TCAN1164-Q1 is a high-speed Controller Area Network (CAN) system basis chip (SBC) that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification. The transceiver...
View ArticleDP83TC812R-Q1 TC-10 compliant 100BASE-T1 automotive Ethernet PHY with RGMII
This device includes the Diagnostic Tool Kit, providing an extensive list of real-time monitoring tools, debug tools and test modes. Within the tool kit is the first integrated electrostatic discharge...
View ArticleTCAN1046A-Q1 Enhanced Automotive dual CAN transceiver with Standby
The TCAN1046A-Q1 is a dual high-speed controller area network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The device supports both...
View ArticleSN75LVPE5421 PCIe® 5.032-Gbps 4-channel linear redriver with integrated 2:1 mux
The SN75LVPE5421 is a four channel linear redriver with integrated multiplexer (mux). The low-power high-performance linear redriver is designed to support PCIe 5.0 and other interfaces up to 32...
View ArticleSN75LVPE5412 PCIe® 5.032-Gbps 4-channel linear redriver with integrated 1:2...
The SN75LVPE5412 is a four channel linear redriver with integrated demultiplexer (demux). The low-power high-performance linear redriver is designed to support PCIe 5.0 and other interfaces up to 32...
View ArticleDP83TC814S-Q1 Low-power 100BASE-T1 automotive Ethernet PHY without TC10 (SGMII)
This device includes the Diagnostic Tool Kit, providing an extensive list of real-time monitoring tools, debug tools and test modes. Within the tool kit is the first integrated electrostatic discharge...
View ArticleDP83TC814R-Q1 Low-power100BASE-T1 automotive Ethernet PHY without TC10
This device includes the Diagnostic Tool Kit, providing an extensive list of real-time monitoring tools, debug tools and test modes. Within the tool kit is the first integrated electrostatic discharge...
View ArticleTHVD1449 3.3-V to 5-V, 12-Mbps, RS-485 transceiver with integrated 4-kV IEC...
THVD14x9(V) devices are half-duplex RS-485 transceivers with integrated surge protection. Surge protection is achieved by integrating transient voltage suppressor (TVS) diodes in the standard 8-pin...
View Article