TPS25772-Q1 Automotive dual USB Type-C® PD controller with buck-boost...
The TPS257xx-Q1 is dual USB Type-C PD and BC1.2 charging port controller for use in automotive dual USB port applications that include charge only and charging with USB 2.0 or 3.0 data. Functionality...
View ArticleTCAN1145-Q1 Automotive enhanced CAN FD and high speed CAN transceiver with...
The TCAN114x-Q1 is a family of enhanced high-speed, CAN FD transceivers supporting data rates up to 5 Mbps. The devices are configured using serial peripheral interface (SPI) for access to full...
View ArticleTCAN1144-Q1 Automotive enhanced CAN FD and high speed CAN transceiver with...
The TCAN114x-Q1 is a family of enhanced high-speed, CAN FD transceivers supporting data rates up to 5 Mbps. The devices are configured using serial peripheral interface (SPI) for access to full...
View ArticleTCAN1043A-Q1 Automotive CAN FD transceiver with wake/inhibit
The TCAN1043A-Q1 (TCAN1043A) is a high speed Controller Area Network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high speed CAN specification. The device...
View ArticleSN55LVCP22A-SP QML class V 2×2 1-Gbps LVDS crosspoint switch with RHA
The SN55LVCP22A-SP is a 2×2 crosspoint switch providing greater than 1000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the receipt...
View ArticleTCAN1057AV-Q1 Enhanced automotive CAN transceiver with silent and 1.8-V I/O...
The TCAN1057A-Q1 and TCAN1057AV-Q1 are high speed controller area network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The...
View ArticleTCAN1057A-Q1 Enhanced automotive CAN transceiver with silent
The TCAN1057A-Q1 and TCAN1057AV-Q1 are high speed controller area network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The...
View ArticleTCAN1044AV-Q1 Enhanced automotive CAN transceiver with standby and 1.8-V I/O...
The TCAN1044A-Q1 and TCAN1044AV-Q1 are high speed controller area network (CAN) transceivers that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The...
View ArticleTCAN1044A-Q1 Enhanced automotive CAN transceiver with standby
The TCAN1044A-Q1 and TCAN1044AV-Q1 are high speed controller area network (CAN) transceivers that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The...
View ArticleDS160PR421 PCIe® 4.0, 16 Gbps, 4-channel linear redrivers with integrated...
The DS160PR421 is four channel linear redrivers with integrated multiplexer (mux). The low-power high-performance linear redriver is designed to support PCIe 4.0 and other interfaces.The DS160PR421...
View ArticleTPD4S311A USB Type-C™ port protector: short-to-Vbus overvoltage, IEC ESD...
The TPD4S311 is a single-chip USB Type-C port protection device that provides 20-V Short-to-VBUS overvoltage and IEC ESD protection.Since the release of the USB Type-C connector, many products and...
View ArticleTCA9416 Ultra-low voltage I2C translator with rise time accelerators
The TCA9416 is a 2-bit bidirectional I2C and SMBus voltage-level translator with an output enable (OE) input and rising and falling edge accelerators. It is operational from 1.08 V to 3.6 V on both the...
View ArticleTHVD8000 RS-485 transceiver with OOK modulation for power line communication
THVD8000 is an RS-485 transceiver with on-off keying (OOK) modulation and demodulation built in for power line communication. Modulating data onto existing power lines allows power ...
View ArticleTLIN2021A-Q1 Automotive Fault-Protected LIN Transceiver with Inhibit and Wake
The TLIN2021A-Q1 is a local interconnect network (LIN) physical layer transceiver. LIN is a low-speed universal asynchronous receiver transmitter (UART) communication protocol that supports automotive...
View ArticleTLIN2029A-Q1 Fault protected local interconnect network (LIN) transceiver...
The TLIN2029A-Q1 is a local interconnect network (LIN) physical layer transceiver with integrated wake-up and protection features, compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS...
View ArticleTUSB216I Commercial third-generation USB 2.0 highspeed signal conditioner...
The TUSB216I is a third-generation USB 2.0 high-speed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.The...
View ArticleDP83TG720S-Q1 1000BASE-T1 automotive Ethernet PHY with RGMII & SGMII
The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver. It provides all physical layer functions needed to transmit and receive data over...
View ArticleDP83TG720R-Q1 1000BASE-T1 automotive Ethernet PHY with RGMII
The DP83TG720R-Q1 device is an IEEE 802.3bp and Open Alliance compliant automotive Ethernet physical layer transceiver. It provides all physical layer functions needed to transmit and receive data over...
View ArticleTHVD1420 3.3-V to 5-V RS-485 transceiver with +/-8-kV IEC ESD protection
THVD1400 and THVD1420 are robust half-duplex RS-485 transceivers for industrial applications. The bus pins are immune to high levels of IEC Contact Discharge ESD events, eliminating the need for...
View Article