TLIN1021-Q1 Automotive local interconnect network (LIN) transceiver with WAKE...
The TLIN1021-Q1 is a local interconnect network (LIN) physical layer transceiver. LIN is a low speed universal asynchronous receiver transmitter (UART) communication protocol that supports automotive...
View ArticleTCAN1046V-Q1 Automotive High Speed Dual CAN Transceiver
The TCAN1046V-Q1 and TCAN1048V-Q1 (TCAN104xV) are dual, high-speed controller area network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high-speed CAN...
View ArticleTUSB2E22 USB 2.0-eUSB2 dual repeater
TUSB2E22 enables implementation of USB 2.0 compliance port on newer processors using lower voltage processes. TUSB2E22 is a USB-Compliant eUSB2-USB 2.0 repeater supporting both device and host...
View ArticleTL16C750E Single UART with 128-byte FIFOs and automatic flow control
The TL16C750E is a single universal asynchronous receiver transmitter (UART) with 128-byte FIFOs, fractional baud rate support, automatic hardware, software flow control and data rates up to 6 Mbps....
View ArticleDS160PR410 Quad-channel PCI-express gen-4 linear redriver
The DS160PR410 is a four channel low-power high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0 and 4.0. The device is a protocol agnostic linear...
View ArticleTUSB216 USB high-speed redriver with over-voltage protection
The TUSB216 is a third-generation USB 2.0 high-speed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.The...
View ArticleDP83826E Low Latency 10/100Mbps PHY with MII interface and Enhanced Mode
The DP83826 offers low and deterministic latency, low power and supports 10BASE-Te, 100BASE-TX Ethernet protocols to meet stringent requirements in real-time industrial Ethernet systems. The device...
View ArticleTCAN1044V Fault-protected CAN FD transceiver with standby mode and 1.8-V IO...
The TCAN1044V is a high speed controller area network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The TCAN1044V transceiver...
View ArticleSN75LVPE4410 Quad-channel PCI-express gen-4 linear redriver
The SN75LVPE4410 is a four channel low-power high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0 and 4.0. The SN75LVPE4410 receivers deploy...
View ArticleTMUXHS4212 Two channel differential 2:1/1:2 20Gbps Mux/Demux
The TMUXHS4212 is a high-speed bidirectional passive switch in mux or demux configurations. It is suited for many applications including USB Type-C® and PCI Express. The TMUXHS4212 is a generic analog...
View ArticleDP83826I Low latency 10/100-Mbps PHY, MII interface and enhanced mode with an...
The DP83826 offers low and deterministic latency, low power and supports 10BASE-Te, 100BASE-TX Ethernet protocols to meet stringent requirements in real-time industrial Ethernet systems. The device...
View ArticleTCAN1057V-Q1 Automotive High Speed CAN Transceiver
The TCAN1057-Q1 and TCAN1057V-Q1 are high speed controller area network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The TCAN1057-Q1...
View ArticleTCAN1057-Q1 Automotive High Speed CAN Transceiver
The TCAN1057-Q1 and TCAN1057V-Q1 are high speed controller area network (CAN) transceivers that meet the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.The TCAN1057-Q1...
View ArticleTHVD1428 3.3-V to 5-V RS-485 transceiver with surge protection
THVD1428 is a half-duplex RS-485 transceiver with integrated surge protection. Surge protection is achieved by integrating transient voltage suppressor (TVS) diodes in the standard 8-pin SOIC (D)...
View ArticleTUSB1146 Type-C USB 3.2 Alt-Mode Redriver/MUX with adaptive EQ
The TUSB1146 is a VESA USB Type-C™ Alt Mode redriving switch supporting USB 3.2 data rates up to 10 Gbps and DisplayPort 2.0 up to 10 Gbps for downstream facing port (Host). The device is used for...
View ArticleTMUXHS4212 2-channel 16-Gbps 2:1/1:2 differential mux/demux
The TMUXHS4212 is a high-speed bidirectional passive switch in mux or demux configurations. It is suited for many applications including USB Type-C® and PCI Express. The TMUXHS4212 is a generic analog...
View ArticleTPS25850-Q1 Dual 3-A USB Type-C charging ports controller with programmable...
The TPS258x-Q1 is an integrated USB charging port solution, which includes a synchronous DC/DC converter capable of supplying up to 6.6 A and integrated detection and control for implementing USB...
View ArticleTHVD8000 RS-485 transceiver with OOK modulation for power line communication
THVD8000 is an RS-485 transceiver with on-off keying (OOK) modulation and demodulation built in for power line communication. Modulating data onto existing power lines allows power delivery and data...
View ArticleTPD3S713-Q1 Automotive USB 2.0 interface protection with adjustable current...
The TPD3S713-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection for high speed data and power lines in automotive USB hub, head unit, telematics, and media interface...
View ArticleTPS25750 Highly integrated USB Type-C® and USB PD controller with...
The TPS25750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS25750 integrates fully managed power paths...
View Article