SN65LVPE502CP Dual Channel USB3.0 Redriver/Equalizer
The SN65LVPE502CP is a dual channel, single lane USB 3.0 redriver and signal conditioner supporting data rates of 5.0Gbps. The device complies with USB 3.0 spec revision 1.0, supporting electrical...
View ArticleTPD1E10B09 Single Channel ESD Protection in 0402 package with 10pF...
The TPD1E10B09 is a single channel ESD protection device in a small 0402 package. The device offers ±20KV IEC air-gap, ±20KV contact ESD protection, and has an ESD clamp circuit with a back-to-back...
View ArticleSN55LVCP22-SP 2x2 Crosspoint Switch : LVDS Outputs
The SN55LVCP22 is a 2×2 crosspoint switch providing greater than 1000 Mbps operation for each path. The dual channels incorporate wide common-mode (0 V to 4 V) receivers, allowing for the= receipt of...
View ArticleTXS0206A TXS0206A MMC, SD Card, Memory Stick(TM) Voltage-Translation Transceiver
The TXS0206A is a level shifter for interfacing microprocessors with MultiMediaCards (MMCs), secure digital (SD) cards, and Memory Stick™ cards. The voltage-level translator has two supply voltage...
View ArticleSN74AUP1T34 1-Bit Unidirectional Voltage-Level Translator
The SN74AUP1T34 is a 1-bit non-inverting translator that uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts supply voltages from 0.9 V to 3.6 V. The...
View ArticleULN2003V12 Low Power Relay Driver (5V to 16V)
The ULN2003V12 is a low power upgrade of TI’s popular ULN2003 family of 7-channel Darlington transistor array. The ULN2003V12 sink driver features 7 low output impedance drivers that minimize on-chip...
View ArticleTUSB8040A 2nd Generation Four Port SuperSpeed USB (USB 3.0) Hub
The TUSB8040A is a four-port USB 3.0 compliant hub. The TUSB8020A is a two-port USB 3.0 compliant hub. The two devices are pin compatible and available in a 100-pin QFN package or 80-pin QFP package....
View ArticleBQ24392 Charger detection device supporting BCDv1.2 with integrated USB2.0...
The bq24392 is a charger detection device with an integrated isolation switch for use with a micro/mini USB port. The device is compliant with USB Battery Charging specification v1.2. This device...
View ArticleTS3USB3200 1:2 Mobile High-definition Link (MHL) / USB2.0 Mux Switch with...
The TS3USB3200 is a double-pole, double throw (DPDT) multiplexer that includes a high speed Mobile High-Definition Link (MHL) switch and a USB 2.0 High-Speed (480Mbps) switch in the same package....
View ArticleSN65HVD257 CAN Transceiver with Fast Loop Times for Highly Loaded Networks...
This CAN transceiver meets the ISO1189-2 High Speed CAN (Controller Area Network) Physical Layer standard. It is designed for data rates in excess of 1 megabit per second (Mbps) in short networks, and...
View ArticleSN74LVC1T45-Q1 Automotive Catalog Single-Bit Dual-Supply Bus Transceiver with...
This single-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 5.5 V. The B port...
View ArticleTSU8111 Single Cell USB Charger with Two Integrated USB2.0 Switches and...
The TSU8111 is a differential high performance automated SP2T switch with impedance detection and integrated Li-Ion linear charger device targeted at space-limited portable applications. The switch...
View ArticleTLK10034 Quad-Channel XAUI/10GBASE-KR Transceiver
The TLK10034 is a quad-channel multi-rate transceiver intended for use in high-speed bi-directional point-to-point data transmission systems. This device supports three primary modes. It can be used...
View ArticleONET1151M 11.35Gbps Differential Modulator Driver with Output Waveform Shaping
The ONET1151M is a high-speed, 3.3-V modulator driver designed to modulate a differentially driven Mach Zehnder Modulator at data rates from 1 Gbps up to 11.35 Gbps. The output amplitude can be...
View ArticleDS125MB203 12.5Gbps Dual Port MUX and Fanout Buffer
The DS125MB203 is an extremely low power, high performance dual port 2:1 mux and 1:2 switch/fanout designed to support high availability systems using SAS-3/2/1, PCIe Gen-3/2/1, 10G-KR and other high...
View ArticleISO5500 2.5 A Isolated IGBT/MOSFET Gate Driver
The ISO5500 is an isolated gate driver for IGBTs and MOSFETs with power ratings of up to IC = 150 A and VCE = 1200 V. Input TTL logic and output power stage are separated by a capacitive, silicon...
View ArticleISO1541 Low-Power, Bidirectional I2C Isolators
The ISO1540 and ISO1541 are low-power, bidirectional isolators that are compatible with I2C interfaces. These devices have their logic input and output buffers separated by TI’s Capacitive Isolation...
View ArticleTCA6418E I2C Controlled 18 Channel GPIO Expander
The TCA6418E is a 18 channel GPIO expansion device with integrated ESD protection. It can operate from 1.65 V to 3.6 V and has 18 general purpose inputs/outputs (GPIO) that can be used via the I2C...
View ArticleTCA9548A 8-Channel I2C Switch With Reset
The TCA9548A has eight bidirectional translating switches that can be controlled via the I2C bus. The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Any individual SCx/SDx...
View ArticleTLK105 Industrial Temp, Single Port 10/100Mbs Ethernet Physical Layer...
The TLK10x is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling, integrating all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. The...
View Article