TCAN1051HG Fault Protected CAN Transceiver With Flexible Data-Rate
This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per...
View ArticleTCAN1051H-Q1 Automotive Fault Protected CAN Transceiver With Flexible Data-Rate
This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per...
View ArticleTCAN1051H Fault Protected CAN Transceiver With Flexible Data-Rate
This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per...
View ArticleTCAN1051GV-Q1 Automotive Fault Protected CAN Transceiver With Flexible Data-Rate
This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per...
View ArticleTCAN1051G-Q1 Automotive Fault Protected CAN Transceiver With Flexible Data-Rate
This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per...
View ArticleTCAN1051-Q1 Automotive Fault Protected CAN Transceiver With Flexible Data-Rate
This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per...
View ArticleTL16C752D Dual UART With 64-Byte FIFO
The TL16C752D is a dual universal asynchronous receiver transmitter (UART) with 64-byte FIFOs, automatic hardware and software flow control, and data rates up to 3 Mbps. The device offers enhanced...
View ArticleDS90UB924-Q1 5 MHz to 96 MHz 24-bit Color FPD-Link III to OpenLDI Deserializer
The DS90UB924-Q1 deserializer, in conjunction with a DS90UB921-Q1, DS90UB925Q-Q1, DS90UB927Q-Q1, DS90UB929-Q1, DS90UB949-Q1, or DS90UB947-Q1 serializer, provides a solution for distribution of digital...
View ArticleTPD3S716-Q1 Automotive USB 2.0 Interface Protection With Adjustable Current...
The TPD3S716-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection with an adjustable current-limit for the USB connector’s VBUS and data lines in automotive USB hubs,...
View ArticleTPD1E04U04 1-Channel ESD Protection Diode With Low Dynamic Resistance for...
The TPD1E04U04 is a unidirectional TVS ESD protection diode for HDMI 2.0 and USB 3.0 circuit protection. The TPD1E04U04 is rated to dissipate ESD strikes above the maximum level specified in the IEC...
View ArticleTCA9539-Q1 Automotive Low-Voltage 16-Bit I2C and SMBus Low-Power I/O Expander
The TCA9539-Q1 is a 24-pin device that provides 16 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus protocol). The device can operate...
View ArticleSN75DPHY440SS CSI-2/DSI DPHY Retimer
The DPHY440 is a one to four lane and clock MIPI DPHY re-timer that regenerates the DPHY signaling. The device complies with MIPI DPHY 1.1 standard and can be used in either a MIPI CSI-2 or MIPI DSI...
View ArticleSN65DPHY440SS CSI-2/DSI DPHY Retimer
The DPHY440 is a one to four lane and clock MIPI DPHY re-timer that regenerates the DPHY signaling. The device complies with MIPI DPHY 1.1 standard and can be used in either a MIPI CSI-2 or MIPI DSI...
View ArticleTRS3122E 2Tx/2Rx Low Voltage, Low Power RS232 Transceiver
The TRS3122E is a two-driver and two-receiver RS-232 interface device, with split supply pins for mixed-voltage operation. All RS-232 inputs and outputs are protected to ±15 kV using the IEC 61000-4-2...
View ArticleTPD3S714-Q1 Automotive USB 2.0 Interface Protection with Short-to-Battery and...
The TPD3S714-Q1 is a single-chip solution for short-to-battery, short-circuit, and ESD protection for the USB connector’s VBUS and data lines in automotive USB hubs, head units, rear seat...
View ArticleTRS3122E 2Tx/2Rx Low Voltage, Low Power RS232 Transceiver
The TRS3122E is a two-driver and two-receiver RS-232 interface device, with split supply pins for mixed-voltage operation. All RS-232 inputs and outputs are protected to ±15 kV using the IEC 61000-4-2...
View ArticleTUSB501-Q1 Automotive USB 3.0 Single Channel Redriver with Equalization
The TUSB501-Q1 is a 3rd generation 3.3-V USB 3.0 single-channel redriver. When 5 Gbps SuperSpeed USB signals travel across a PCB or cable, signal integrity degrades due to loss and inter-symbol...
View ArticleTUSB1002 USB3.1 10Gbps Dual Channel Linear Redriver
The TUSB1002 is the industry’s first dual-channel USB 3.1 SuperSpeedPlus (SSP) redriver and signal conditioner. The device offers low power consumption on a 3.3-V supply with its ultra-low-power...
View ArticleTPD1E01B04 1-Channel ESD Protection Diode for USB Type-C and Thunderbolt 3
The TPD1E01B04 is a bidirectional TVS ESD protection diode array for USB Type-C and Thunderbolt 3 circuit protection. The TPD1E01B04 is rated to dissipate ESD strikes at the maximum level specified in...
View ArticleTPS25740A TPS25740A USB Type-C Rev 1.2 and USB PD 2.0 Source Controller...
The TPS25740, TPS25740A implements a source that is compliant to USB Power Delivery 2.0 version 1.2 and Type-C revision 1.2. It monitors the CC pin to detect when a USB Type-C sink is attached, then...
View Article