TUSB211 USB 2.0 High Speed Signal Conditioner
The TUSB211 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel. The device has a patent-pending design which is agnostic to USB Low Speed...
View ArticleTUSB321 USB Type-C Configuration Channel Logic and Port Control
The TUSB321 device enables USB Type-C ports with the configuration channel (CC) logic needed for Type-C ecosystems. The TUSB321 device uses the CC pins to determine port attach and detach, cable...
View ArticleTPS65982 USB Type-C & USB PD Controller Power Switch & High Speed Multiplexer
The TPS65982 is a stand-alone USB Type-C & Power Delivery (PD) controller providing cable plug and orientation detection at the USB Type-C connector. Upon cable detection, the TPS65982...
View ArticleHD3SS2522 USB TypeC SS MUX with DFP Controller
HD3SS2522 is a 2:1 USB mux with Configuration Channel (CC) logic with Downstream Facing Port (DFP) support. The HD3SS2522 presents itself as a DFP according to the USB Type-C Spec. The CC logic block...
View ArticleTLK10031 Single-Channel XAUI/10GBASE-KR Transceiver
The TLK10031 is a single-channel multi-rate transceiver intended for use in high-speed bi-directional point-to-point data transmission systems. This device supports three primary modes. It can be used...
View ArticleONET1130EP 11.7 Gbps Transceiver with Modulator Driver
The ONET1130EP is an integrated modulator driver and limiting amplifier designed to operate from 1 Gbps to 11.7 Gbps. Optical and electrical loopback are included and a two-wire serial interface...
View ArticleONET1130EC 11.7Gbps Transceiver with Integrated EML Driver
The ONET1130EC is a 2.5 V integrated modulator driver and limiting amplifier with transmit and receive clock and data recovery (CDR) designed to operate between 9.80 Gbps and 11.7 Gbps without the...
View ArticleHD3SS3411-Q1 One Channel Differential 2:1 Mux/Demux
The HD3SS3411-Q1 is a high-speed bi-directional passive switch in multiplexer or demultiplexer configurations. Based on control pin SEL, the device provides switching of differential channels between...
View ArticleTUSB211-Q1 Automotive USB 2.0 High Speed Signal Conditioner
The TUSB211-Q1 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel. The device has a patent-pending design which is agnostic to USB Low...
View ArticleSN65HVD63 AISG 3.0 On-Off Keying Modem Transceiver
The SN65HVD63 transceiver modulates and demodulates signals between a logic (baseband) interface and a frequency suitable for long coaxial media, to facilitate wired data transfer among radio...
View ArticleTUSB320LI USB Type-C Configuration Channel Logic and Port Control
The TUSB320LI and TUSB320HI devices (remainder of this document called TUSB320 unless otherwise noted) enables USB Type-C ports with the configuration channel (CC) logic needed for Type-C ecosystems....
View ArticleTUSB320HI USB Type-C Configuration Channel Logic and Port Control
The TUSB320LI and TUSB320HI devices (remainder of this document called TUSB320 unless otherwise noted) enables USB Type-C ports with the configuration channel (CC) logic needed for Type-C ecosystems....
View ArticleSN75DP159 6 Gbps DP++ to HDMI Retimer
The SNx5DP159 device is a dual mode DisplayPort to transition-minimized differential signal (TMDS) retimer supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI)...
View ArticleSN65DP159 6 Gbps DP++ to HDMI Retimer
The SNx5DP159 device is a dual mode DisplayPort to transition-minimized differential signal (TMDS) retimer supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI)...
View ArticleLMH0318 3 Gbps HD/SD SDI Reclocker with Integrated Cable Driver
The LMH0318 is a 3 Gbps HD/SD SDI Reclocker with Integrated Cable Driver designed to drive serial video data compatible to SMPTE-SDI and DVB-ASI standards. The clock and data recovery circuit...
View ArticleTPS25810 Type C 3.0-A USB Power Supply
The TPS25810 is a USB Type-C Downstream Facing Port (DFP) controller with an integrated 3-A rated USB power switch. The TPS25810 monitors the Type-C Configuration Channel (CC) lines to determine when...
View ArticleSN55HVD75-EP 3.3-V Supply RS-485 With IEC ESD Protection
These devices have robust 3.3-V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events with high levels of protection to human-body model...
View ArticleTUSB4020BI Two-Port USB 2.0 Hub
The TUSB4020BI is a two-port USB 2.0 hub. It provides USB high-speed/full-speed connections on the upstream port and provides high-speed, full-speed, or low-speed connections on the two downstream...
View ArticleTUSB4041I-Q1 Four-Port USB 2.0 Hub
The TUSB4041I-Q1 device is a four-port USB 2.0 hub. The device provides USB high-speed or full-speed connections on the upstream port. The device also provides USB high-speed, full-speed, or low-speed...
View ArticleTUSB4041I Four-Port USB 2.0 Hub
The TUSB4041I device is a four-port USB 2.0 hub. The device provides USB high-speed or full-speed connections on the upstream port. The device also provides USB high-speed, full-speed, or low-speed...
View Article